Workhorse 1000

Workhorse 1000 - Rider Floor Machine - Propane

The Workhorse 1000 is a very versatile floor tile scraper.Small enough to go through a 29″ doorway and short enough to go into a smallelevator with a overall length of only 49″.

The net weight of the floor tile scraper is only 1,100 lbswith all the weights removed. Light enough to not overload most smallelevators. This compact size and light weight also make this scraper a greatchoice to remove those roofing products like felt paper, foam, and rock. Unlikethe competition this floor scraper has a large 8″ diameter front caster wheeland 5″ of ground clearance to allow maneuvering in rough areas.

With stringent EPA regulations the current propane certifiedengine is a Subaru EH72 air cooled with 24 hp. Maximum weight of the floor tilescraper loaded with optional weights is 2,800 lbs. The standard weight of 2,100lbs. is usually sufficient for most floor scraping jobs. Ceramic tile removalis usually the most demanding removal and more weight the better to keep theceramic removal tool sliding on the concrete under the ceramic tile. Withforward speeds near 6 mph this machine can move quickly across a large jobsite.

- Rotating blade holder maintains better floor contact

- Blade holder rotates 180° to eliminate the need to sharpenblade

- 24 HP Honda engine with catalytic exhaust converter

- 30 inches wide, 49 inches long, and 1000 lbs. (weights& blade holder removed)

- Will travel through standard doorways and fit in smallelevators

- Propane fuel tanks use standard gas grill tank for easyrefills

- Comes with 720 lbs. of removable weights

- 480 lbs. of additional weights can be added for thosetough projects

- Non-marking traction tires

Empty Weight: 1,100lbs

Gross Weight: 2,800lbs

Fuel Capacity: 20lb tank

Hydraulic Capacity:5 gal

Travel Speed: 6MPH

Engine: SubaruEH72

Maximum RPM: 3600RPM

Cooling Medium: AirCooled

No. of Cylinders:2