OCCUPATIONAL TRAINING AND SUPPLY
Utilizing the power of methylene chloride, Piranha 2 attacks
multiple layers of paint in a single application to remove most oil and latex
paints, varnishes, shellacs, lacquers and enamels. The powerful paint remover
does not require anti-evaporation paper like many caustics or other weaker
solvent formulas.- Professional paint remover that attacks multiple layers of
lead-based paint in a single application
- Non-flammable and will not raise the grain of wood or corrode
- Does not require anti-evaporation paper
- Recommended Use: Remove the most difficult oil and latex paints,
varnishes, shellacs, lacquers and enamels. Contains methylene chloride.
For indoor application, open all windows and doors or use
other means to assure a constant supply of fresh moving air during use. Do not use Piranha 2 in poorly ventilated
areas. Ideal working temperature is between 65°- 85°F. Avoid direct sunlight.
Protect floor coverings and other areas not being stripped. Do not use on synthetic fabrics, plastic,
linoleum, asphalt, foam products or rubber tile.
Apply Piranha 2 with brush or airless spray equipment.
Brush: Synthetic, nylon or polyester bristle
Spray: .017 to .021 tips
Stir well before using.
Open pail carefully to avoid splashing.
For best results, test a small area to determine the appropriate
thickness, and duration of time required to most effectively remove the
lead-based paint. Brush on a thick layer
in one direction for best results.
Brushing back and forth opens up the anti-evaporation barrier, which
forms on the initial pass. Allow Piranha 2 to work 5-15 minutes before
performing a test scrape to determine how much paint has been lifted. Once Piranha 2 finishes removing the paint
from the surface, scrape it away with putty knife, cloth or steel wool. Clean substrate with a mild detergent
solution to remove any residues. Collect waste in a metal container and dispose
of all waste in accordance with existing regulations. Piranha 2 does not require a neutralizer.
Smooth Surfaces: 100 ft2/gal.
Porous Surfaces: 50-100 ft2/gal.
Clean tools with a mild detergent solution to remove any
residues. Dispose of all waste according to all existing local, state and
Instantly attacks multiple layers of paint
Does not raise the grain of wood or corrode metals
Removes oil and latex paints, varnish, shellacs, lacquers
Back to top