Versi-Foam^® 2 lb closed cell spray foam insulation kits are available in two different formulations: Standard Formula and Class I (flame-retardant) Formula. The Standard Formula provides an R-value of 7.7 at a one inch thickness. Recommended for most commercial and industrial applications, the standard formula is ideal for air sealing, wall or ceiling insulation, condensation control, sound dampening, structural enhancement, tank and pipe insulation, roof repair, marine flotation, truck/trailer insulation, sculpting and molding, pool and spa insulation, and much more.

- Versi-Foam® Standard Density (1.75 pcf) Systems are the most commonly utilized in the Versi-Foam® product line. All are available in a standard formula and Class I* flame-retardant formula. System 15: Yields 200 ft2 at 1” or 16.5 ft3


Customers in California, Colorado, Delaware, Maine, Maryland, Massachusetts, New Jersey, New York, Rhode Island, Vermont, Virginia, Washington and Canada are no longer able to use this product due to local regulations and must use the Low GWP formula here.

Connecticut, Hawaii, Nevada, Oregon, and Texas will join the list of affected states in the near future.

Packaged in one carton and includes the two chemical components, our patented U-Control dispensing gun attached to two 10-foot hoses, ten mixing nozzles, three fan tips, and nitrile gloves. System 15 will produce 198 square feet of cured foam at a 1" thickness, or 16.5 cubic feet. Available in both the Standard and Class I formula.

Medium systems can be shut down and used on another day. Once the kit is opened, it is recommended that the kit be used in 30 days, and it is required that the systems are used at least once every seven days.

Standard Spec Sheet

Class I Spec Sheet

Standard Safety Sheet

Class I Safety Sheet

Class I (flame-retardant) Formula provides an R-value 6.7 at a one inch thickness. Classified as Class I in accordance with ASTM E-84, these flame-retardant kits will limit the flame spread and smoke development if exposed to a fire. Class I kits are recommended for use in inhabited buildings, including residential applications or any application in which flammability is a concern. Always consult your local building codes to determine if a flame retardant product is required for your application.

All of the Class I kits are manufactured with an anti-microbial formula that stops mold from growing on the surface of the foam. All Versi-Foam^® products are naturally mold resistant, but the added anti-microbial element provides a safeguard against the growth of the five most common types of fungi found in homes.