 |
Versi-Foam® 2 lb closed cell spray foam insulation kits are
available in two different formulations: Standard Formula and Class I
(flame-retardant) Formula. The Standard Formula provides an
R-value of 7.7 at a one inch thickness. Recommended for most commercial
and industrial applications, the standard formula is ideal for air
sealing, wall or ceiling insulation, condensation control, sound
dampening, structural enhancement, tank and pipe insulation, roof
repair, marine flotation, truck/trailer insulation, sculpting and
molding, pool and spa insulation, and much more.
- Versi-Foam® Standard Density (1.75 pcf) Systems are the most commonly utilized in the Versi-Foam® product line. All are available in a standard formula and Class I* flame-retardant formula.
Customers in California, Colorado, Delaware, Maine, Maryland, Massachusetts, New Jersey, New York, Rhode Island, Vermont, Virginia, Washington and Canada are no longer able to use this product due to local regulations and must use the LOW GWP (HFO) FORMULA.
Connecticut, Hawaii, Nevada, Oregon, and Texas will join the list of affected states in the near future.
Packaged in two cartons. The system is complete with the two
chemical components, our patented U-Control dispensing gun attached to two
15-foot hoses, ten mixing nozzles, three fan tips, and nitrile gloves. Will
produce 600 square feet of cured foam at a 1" thickness, or 50 cubic feet.
Available in both the Standard and Class I formula.
Large systems can be shut down and used on another day. Once
the kit is opened, it is recommended that the kit be used in 30 days, and it is
required that the systems are used at least once every seven days.
Standard Spec Sheet
Class I Spec Sheet
Standard Safety Sheet
Class I Safety Sheet
Class I (flame-retardant) Formula provides an R-value 6.7 at a
one inch thickness. Classified as Class I in accordance with ASTM E-84,
these flame-retardant kits will limit the flame spread and smoke
development if exposed to a fire. Class I kits are recommended for use
in inhabited buildings, including residential applications or any
application in which flammability is a concern. Always consult your
local building codes to determine if a flame retardant product is
required for your application. All of our Class I kits are
manufactured with an anti-microbial formula that stops mold from growing
on the surface of the foam. All Versi-Foam® products
are naturally mold resistant, but the added anti-microbial element
provides a safeguard against the growth of the five most common types of
fungi found in homes.
|
|
 |