Features
- Vacuum shroud used in dust containment while using drills
and percussion hammers - Captures up to 99% of concrete dust and slurry - Works with any drill bit 1 3/8” or smaller - Made of flexible rubber that sucks to any surface - Complies with OSHA Silica Rule and EPA regulations for
point-of-origin dust containment
Universal Some people buy a drill just for the included shroud. Don’t
buy a new one—use the drills you already have. The 1 3/8” BitBuddie works with any drill bit smaller than 1
3/8”, including bit used to install alarms to masonry, paddle, or core bits.
The included adapter hose will adapt to most standard wet dry vacuums. Captures 99% Of Dust The BitBuddie captures nearly all dust generated while
drilling. Using vacuum suction, the dust and debris are caught, giving you a
truly dustless work environment. This saves you and your workers from breathing harmful
silica dust while keeping the area dust free, saving time and money in cleanup. Held In Place By Suction The BitBuddie uses vacuum suction to “stick” to whatever
surface you are drilling. Slits around the bottom bring in the dust while
maintaining a vacuum seal. The BitBuddie can be used on concrete, wood, drywall, metal,
and nearly any other material on ceilings, walls, floors, and any other
surface. OSHA Silica Law Compliant In September 2017, strict laws passed and enforced by OSHA
go into effect limiting silica dust exposure. Penalties and fines can be
severe. When used with a certified HEPA vacuum the BitBuddie is
compliant with OSHA and EPA laws, keeping you and your workers safe from legal
action and protecting you from harmful diseases caused by silica exposure.
|