OCCUPATIONAL TRAINING AND SUPPLY
Seal a dust barrier without tape in secondsTwo 4 foot aluminum rails with two T-Clip™ connectors.
Attach to any ZipWall® pole and tightly seal a barrier along the ceiling,
floor, or walls. Require no ladders or tape and leave no damage. Can be used
with plastic sheeting or ZipFast™ reusable barrier panels.Tightly seal a ZipWall® dust barrier in seconds without
tape, ladders, or damageAfter a dust barrier is in place, it can be sealed more
tightly using FoamRail™ tapeless seals along the ceiling, floor, or walls. The
2-Pack includes two 4 foot aluminum FoamRail™ tapeless seals with two T-Clip™
attachments that can seal up to 8 feet of a dust barrier.FoamRail™ tapeless seals work with all ZipWall® poles. The
TClip™ connector snaps onto the ball joint of a ZipWall® pole to seal a dust
barrier at the ceiling. Add SideClamp™ wall mounts to seal at the wall, and
Floor Adaptors to seal at the floor.FoamRail™ tapeless seals prevent dust from escaping the work
area during remodeling, renovation and repair. Unlike tape, the FoamRail™
product line is reusable and provides a robust dust control solution that
easily lasts the duration of the project. It can be used with negative or
positive air, and is especially useful for construction work in locations like
health care facilities, restaurants, retail space, office buildings, and any
occupied residential or commercial property.
*To use the Foam Rail crossbars, you will need to remove the
head of the pole by pulling it straight off. Then snap the Foam Rail onto the
top of pole. Each Foam Rail crossbar is 4 feet long.
- Seal a dust barrier without tape in seconds- Require no ladders and leave no damage- Aluminum construction with compressed foam- Reusable and cost-effective- Can be used with negative or positive air- Work with all ZipWall® poles- A great alternative for tape when tight sealing is
Back to top