Used with the tile lifter bar
3”

Used with the tile lifter bar
6”

Used with Workhorse 1000
Sold by the each
Best blade for Tile removal

5/box
Removes dirt and old finish build-up
Cleans down to the original surface

Used with Workhorse 1000
Sold by the each

Threaded - 5/8 x11
8 Diamond Segments
Use wet or dry

5/box
Removes dirt and old finish build-up
Cleans down to the original surface

Used with On Floor Multi-Surface 16" Machine
For mastic & carpet glue removal
Sold by the each

4" x 6" Side Cut Carpet Blade
Sold by the each

5/box
Removes dirt and old finish build-up
Cleans down to the original surface

Used with Workhorse 1000
Sold by the each

4" Blade used with Long Reach Steel Scraper

Used with Workhorse 1000
Sold by the each

8" Blade used with Long Reach Steel Scraper

Used with Edco Magna-Trap Dual-Disc Floor Grinder
Sold by the each

3 x 12" Double Edge Carpet Blade
Sold by the each

4” x 4” x 0.125 Thick
Sold by the each

Used with Prep/Master® Jr. floor grinding machine
Sold by the each

Used with Prep/Master® Jr. floor grinding machine
Sold by the each

25 Grit, hard bond. Aggressive, fast cutting 2 segment metal bond tooling used to remove black mastic, epoxy, adhesives, and thin-set.

Used with Workhorse 1000
Sold by the each
"Premo" blade; lasts longer

Works well on hard troweled floors or where there’s a cure and seal/curing compound on the surface that need to be removed
30/40 grit diamonds

A little thinner than the SPS130, but gives up none of the performance making this tooling a great economical choice.
Size: 3", 16/20 Grit

Used with Workhorse 1000
Sold by the each
"Premo" blade; lasts longer

Used with Workhorse 1000
Sold by the each

Used with Edco Magna-Trap Dual-Disc Floor Grinder
Sold by the each

For stripping and scrubbing of rough concrete surfaces
High carbon steel, 30 gauge wire

63”Long

For stripping and scrubbing of rough concrete surfaces
High carbon steel, 30 gauge wire

For stripping and scrubbing of rough concrete surfaces
High carbon steel, 30 gauge wire