 |
 |
 |
 |
Versi-Tite® Window & Door is a one component
polyurethane foam used to seal small gaps and crevices. It dispenses from the
can in a 3/8" caulking bead for easy use in sealing around doors, windows,
pipes, outlets or any other penetrations. Versi-Tite® Window & Door is a moisture-cured product
and should not be used to fill voids larger than 1 inch. For large voids,
Versi-Foam® should be used. The minimal expansion of Versi-Tite® Window & Door
allows for use around door and window framing. For this application, dispense
the foam as a caulking bead, filling approximately 35% to 50% of the cavity
opening. The foam will expand to fill the entire cavity. The foam is considered
flame retardant, with an ASTM-E84 flame spread rating of 25 and a smoke
developed rating of 50. It has a UL listing, number R-27463. It is suitable for
use in any type of structure.
Will yield approximately 1,842 linear feet per can based at
the 3/8" caulking bead. The dispensing gun for the gun foam allows for
more control over chemical flow and caulking bead size. Dispensing guns are
available in all metal construction.
Cleaning solvent, which is utilized to flush out the guns at
the end of the day, is available in a 16 oz. pressurized can. At the end of the
day you unscrew the foam can, screw on the gun cleaner, pull the trigger to
flush out the gun, and put the foam can back on.
Yield | 12
oz. | 24
oz. | 1/4”
bead | 2,073
linear ft | 4,146
linear ft | 3/8”
bead | 921
linear ft | 1,842
linear ft | 1/2”
bead | 518
linear ft | 1,036
linear ft |
Spec Sheet
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
Versi-Tite® is a one component polyurethane foam sealant
specifically formulated for filling, insulating, and sealing around windows and
doors to provide a full cavity fill without warping or bowing of frames.
Dispensed as a caulking bead, the innovative low pressure and low expansion
formula conforms to the shape of all cavities forming a permanent, airtight,
and waterproof seal on wood, metal, masonry, glass, and most plastics. It stops
air infiltration and, in turn, prevents heat loss and drafts. Versi-Tite®
contains no CFC’s or HCFC’s, and is UL Classified.
|
|
 |
 |
 |
 |

|